Minwax® Polycrylic® Protective Finish is a crystal clear, ultra fast-drying protective topcoat for use on interior wood surfaces including furniture, trim, doors, cabinets and paneling. It can be used over bare wood and both oil-based and water-based stains.

What does Minwax Polycrylic do?

About this item. PROTECT WOOD SURFACES – Minwax Polycrylic Protective Finish protects and adds beauty to your interior wood projects, including woodwork, furniture, doors and cabinets. The clear top coat protects against scratches, spills, dirt and more.

Is Minwax Polycrylic the same as polyurethane?

The formula has an acrylic base; polyurethane is added for better adhesion and durability. Polycrylic is not as durable as polyurethane and is meant to be used only on interior surfaces such as cabinets, furniture, and trim.

What is polycrylic good for?

The main purpose of Polycrylic is to protect the wood. Polycrylic comes available in a variety of finishes including high gloss and satin finishes. Not only does Polycrylic come with the benefit of protecting wood pieces from various forms of damage, like water damage, but it also helps add some beauty to the mix too.

Can I use polycrylic over painted wood?

Can Polycrylic® Protective Finish be used over paint and wall coverings? Yes. Polycrylic® may be applied over latex and oil-based paints and well-bonded wall coverings. Because slight ambering may occur, spot test on an inconspicuous area and let dry to ensure satisfactory results.

21 related questions found

How does polycrylic prevent brush strokes?

Apply Polycrylic Without Streaks

  1. Use a quality synthetic bristle brush.
  2. Apply with the grain of the wood.
  3. Use long strokes in one direction. Short, back and forth strokes can leave streaks or brush strokes.
  4. Apply thin, even coats and brush out any drips.
  5. Keep a wet edge. Work from wet areas towards dry areas.

Will polycrylic yellow over white paint?

Will Polycrylic Make White Paint Yellow? Water-based clear coats are the only poly option I listed above for the best clear coats for white paint. Minwax Polycrylic is the only oil-based option. Because this formula is water-based, it does not yellow.

How long does polycrylic last?

However, polycrylic is not as hard as polyurethane. This is because polycrylic has a very low level of paint chemicals and synthetic additives when compared to polyurethane. As such, the finish when dry is not as hard as polyurethane but is still hard enough to last over 10 years if applied correctly.

Is polycrylic good for table tops?

As it is, polycrylic and polyurethane are good for many of the same projects, including desks, side tables, picture frames, and dressers.

Does Minwax Wipe on Poly yellow?

The best non-yellowing clear coat is Minwax's Polycrylic. It's easy to use, dries within a few hours, can be applied multiple times within 24 hours, dries completely clear, and doesn't yellow over time. It comes in a variety of sheens, including satin, semi-gloss, and gloss.

Is polycrylic waterproof?

Polycrylic is a clear waterproof finish that is used in wooden surfaces such as furniture or interior and provides a glossy smooth finish on wooden surfaces. Although it is considered a waterproof topcoat finish, it is semi-waterproof because it creates a thin layer on the wooden surfaces when sprayed.

What is the most durable clear coat for wood?

Polyurethane wood finishes are synthetic coatings that are highly durable and water resistant, making them the best clear coat for wood protection.

Can you wipe on Minwax polycrylic?

It's not suitable for wiping. After the first coat, sand off the raised grain with 220/ 320 grit sandpaper. In between coats, lightly sand with 220/ 320. This stuff dries really fast, so you can get multiple coats in a day.

Is Minwax Polycrylic a varnish?

Minwax Semi-Gloss Polycrylic Spray Protective Finish Spray Varnish, 11.5 Oz. Size: 11.5 Oz.

What will happen if I don't sand between coats of polycrylic?

If you don't sand between coats of polycrylic finish, the topcoats wouldn't adhere properly to the base coats because the base coat will be riddled with grain and dust particles. You will also notice uneven application if you don't sand between coats of polycrylic finish.

Can I use polycrylic over acrylic paint?

Yes. Latex and oil-based paints and well-bonded wall coverings can be coated with polycrylic. If you notice a slight ambering, spot test on an inconspicuous area and let dry to ensure a satisfactory result.

Is Minwax Polycrylic safe for food?

Minwax Polycrylic Spray:

Minwax is one of the best Polycrylic food-safe clear coats. It makes the wood surface both durable and glossy. Also, it is non-toxic, though you need to wait for 30 days to make it safe for babies and food-safe.

Is polycrylic scratch resistant?

It's ready for light handling after about three hours but needs at least 24 hours before it's ready for “normal use”. We need to be careful during this time because it can scratch or dent before it's fully cured. Polycrylic doesn't resist heat and moisture as well as oil-based polyurethane.

Is polycrylic a food grade?

This food safe clear coat works best over lighter raw wood surfaces like birch or maple wood and dries within two hours. Minwax polycrylic should only be used indoors and can easily be cleaned up with water.

How long is Minwax polyurethane good for?

Minwax Polyurethane Shelf Life

Oil-based and water-based polyurethanes are projected to have about three years of shelf life.

Does polycrylic turn chalk paint yellow?

How Do You Seal White Chalk Paint Without Yellowing It? Minwax Polycrylic water-based protective polish protects white painted furniture against yellowing.

Why is my clear coat yellowing?

Yellowing of clearcoats is a natural phenomenon during weathering processes, as well as from extreme baking conditions, due to polymer degradation. However, occasionally yellowing may be caused by unexpected chemical reactions occurring in the clearcoat.

What top coat does not yellow?

  • CrystaLac Extreme Protection Polyurethane is an interior NON-YELLOWING, Environmentally Safe Top Coat that is Super Hard, Super Clear and Super Easy to Use. ...
  • Coverage is approximately 400 to 500 sq. ...
  • Dry time is usually 30 min to 1 hour. ...
  • Do Not use stearated sandpaper or tack cloths.